Design and commissioning of a virtual image solar simulator for testing thermal collectors

Roger Moss, Stan Shire, Phillip Eames, Paul Henshall, Trevor Hyde, Farid Arya

Research output: Contribution to journalArticlepeer-review

15 Citations (Scopus)
23 Downloads (Pure)


A solar simulator has been designed and built for testing prototype (0.5 ×0.5 m) flat plate thermal collectors. An internally reflecting light tube generates multiple virtual images of the four halogen floodlights to ensure uniform illumination. Ray-tracing simulations were used to choose the tube dimensions and maximum allowable clearance. Illumination measurements agree well with these predictions.The visible & near IR spectrum appears to follow a black body curve. In the absence of a “cold sky” IR filter there is a secondary, long wavelength IR spectral component that causes heating of the cover glass on a solar flat plate collector. The cover glass temperature can be maintained at typical outdoor levels using a cooling fan. The design would be well suited to LED illumination.Simulation of solar collector response to this spectrum shows that an efficiency based on pyranometer readings is approximately 1% higher than would be obtained with an AM1.5 spectrum.
Original languageEnglish
Pages (from-to)234-242
JournalSolar Energy
Early online date8 Nov 2017
Publication statusPublished - 1 Jan 2018

Bibliographical note

Open Access funded by EPSRC
Reference text: Bazzi, A.M., Klein, Z., Sweeney, M., Kroeger, K.P., Shenoy, P.S., Krein, P.T., July/August
2012. Solid-state solar simulator. IEEE Trans. Ind. Appl. 48 (4), 1195–1202.
Bliss, M., Betts, T.R., Gottschalg, R., 2009. An LED-based photovoltaic measurement
system with variable spectrum and flash speed. Sol. Energy Mater. Sol. Cells 93,
Codd, D.S., Carlson, A., Rees, J., Slocum, A.H., 2010. A low cost high flux solar simulator.
Sol. Energy 84, 2202–2212.
Dibowski, G., Eber, K., 2017. Hazards caused by UV rays of xenon light based high
performance solar simulators. Safety and Health at Work.
Dong, X., Sun, Z., Nathan, G.J., Ashman, P.J., Gu, D., 2015. Time-resolved spectra of solar
simulators employing metal halide and xenon arc lamps. Sol. Energy 115, 613–620.
Ekman, B.M., Brooks, G., Rhamdhani, M.A., 2015. Review development of high flux solar
simulators for solar thermal research. Sol. Energy Mater. Sol. Cells 141, 436–446.
Grandi, G., Ienina, A., Bardhi, M., 2014. Effective low-cost hybrid LED-halogen solar simulator.
IEEE Trans. Ind. Appl. 50 (5) [Sept/Oct].
Henshall, P., Eames, P., Arya, F., Hyde, T., Moss, R., Shire, S., 2016. Constant temperature
induced stresses in evacuated enclosures for high performance flat plate solar thermal
collectors. Sol. Energy 127, 250–261.
Incropera, F.P., DeWitt, D.P., 2002. Introduction to Heat Transfer. Wiley.
Jang, S.H., Shin, M.W., 2010. Fabrication and thermal optimization of LED solar cell
simulator. Curr. Appl. Phys. 10, S537–S539.
Kohraku, S., Kurokawa, K., 2006. A fundamental experiment for discrete-wavelength LED
solar simulator. Sol. Energy Mater. Sol. Cells 90, 3364–3370.
Kolberg, D., Schubert, F., Klameth, K., Spinner, D.M., 2012. Homogeneity and lifetime
performance of a tunable close match LED solar simulator. Energy Proc. 27, 306–311.
Kreuger, K.R., Lipiński, W., Davidson, J.H., 2013. Operational Performance of the
University of Minnesota 45 kWe High-Flux Solar Simulator. ASME J. Solar Energy
Eng. 135/044501 (Nov).
McDonald, G.E., 1975. Spectral reflectance properties of black chrome for use as a solar
selective coating. Sol. Energy 17, 119–122.
Meng, Q., Wang, Y., Zhang, L., 2011. Irradiance characteristics and optimization design of
a large-scale solar simulator. Sol. Energy 85, 1758–1767.
Plyta, F., 2015. Optical Design of a Fully LED-Based SOLAR simulator. PhD thesis.
Loughborough University.
Polyanskiy, M., Refractive Index Info website
book=NSG-multipurpose&page=Pilkington-Optiwhite (accessed 1/3/2017).
Rubin, M., 1985. Optical properties of soda lime silica glasses. Sol. Energy Mater. 12,
Sarwar, J., Georgakis, G., LaChance, R., Ozalp, N., 2014. Description and characterization
of an adjustable flux solar simulator for solar thermal, thermochemical and photovoltaic
applications. Sol. Energy 100, 179–194.
Shatat, M., Riffat, S., Agyenim, F., 2013. Experimental testing method for solar light simulator
with an attached evacuated solar collector. Int. J. Energy Environ. 4 (2),
Schubert, F., Spinner, D., 2016. Solar simulator spectrum and measurement uncertainties.
Energy Proc. 92, 205–210.
Simon, F.F., 1976. Flat-plate solar-collector performance evaluation with a solar simulator
as a basis for collector selection and performance prediction. Sol. Energy 18,
Tinox Energy™ website
(accessed 1/3/2017).


  • Simulator
  • Spectrum
  • Collector
  • Black body


Dive into the research topics of 'Design and commissioning of a virtual image solar simulator for testing thermal collectors'. Together they form a unique fingerprint.

Cite this