Determinants for innovation implementation at SME and inter SME levels within peripheral regions

Research output: Contribution to journalArticlepeer-review

37 Citations (Scopus)


Purpose - Innovation efforts of small- or medium-sized enterprises (SMEs) in peripheral regions are limited both by innate resource limitations and by location factors such as excessive distance from key markets and higher cost bases for new technology. However, the emergence of the knowledge economy may enable leveraging of knowledge to address such innate limitations. The aim of this study is to twofold. First, the study explores how SMEs in peripheral areas, i.e. challenging regions, seek to implement innovation from a path perspective by examining the contributions from antecedent and mediator variables or constructs, including knowledge-based factors identified in the literature, using a cross-sectional survey of SMEs at firm level. Second, to further examine how these path model constructs and relationships contribute in a causal manner to innovation implementation at an activity level of analysis based on knowledge-based view and dynamic capability theory, using a case study analysis. Design/methodology/approach - A sequential mixed method approach is used. In relation to the first aim a hypothetical path model is tested using structured equation modelling techniques based on a cross-sectional survey of SMEs in peripheral regions (n=604). For the second aim, to further examine how the path model constructs and relationships contribute to innovation implementation in a causal manner at an activity level of analysis, an explanatory case-based approach is used based on dynamic capability theory. Findings - The findings show that at a firm level knowledge factors influence innovation implementation as mediating factors through knowledge acquisition and assimilation which is consistent with potential absorptive capacity, and knowledge sharing linkages. Antecedent factors of lifecycle, leadership, culture and historical propensity to innovation were found to interact with the mediating variables of knowledge acquisition and assimilation, TQM/business improvement and knowledge sharing linkages (external), to produce a range of innovation outputs, including knowledge transformation and sales of new products and services from innovation activities. Based on the case study findings the underlying knowledge-based dynamic capabilities which contribute to the relationships within the path model were identified and further research agendas established. Originality/value - There is a relative paucity of studies on innovation implementation within SMEs in peripheral regions using a knowledge-based perspective at firm level, as opposed to regional level (e.g. regional innovation studies). In this context unique resource limitations and the contribution of knowledge-based factors need to be addressed. This study seeks to compliment regional level studies by making a contribution at both a cross-sectional SME or firm level and at an activity level of analysis in this area and to identify areas for further research.
Original languageEnglish
Pages (from-to)66-90
JournalInternational Journal of Entrepreneurial Behaviour & Research
Issue number1
Publication statusPublished - 28 Feb 2014

Bibliographical note

Reference text: Ambrosini, V., Bowman, C. and Collier, N. (2009), “Dynamic capabilities: an exploration of how
firms renew their resource base”, British Journal of Management, Vol. 20 No. 5, pp. 9-24.
Anderson, A.R., Jack, S. and McAuley, A. (2001), “Periphery? What periphery? Marketing to
a state of mind”, Irish Marketing Review, Vol. 14 No. 1, pp. 26-34.
Atkinson, R. and Kintrea, K. (2001), “Disentangling area effects: evidence from deprived and
non-deprived neighbourhoods”, Urban Studies, Vol. 38 No. 12, pp. 2277-2298.
Barclay, I. and Porter, K. (2005), “Facilitating innovation across SME networks”, International
Journal of Entrepreneurship and Innovation Management, Vol. 5 No. 1, pp. 20-35.
Bentler, P.M. (1990), “Comparative fit indices in structural models”, Psychological Bulletin,
Vol. 107 No. 2, pp. 238-246.
Bessant, J. and Caffyn, S. (1997), “High-investment innovation through continuous improvement”,
International Journal of Technology Management, Vol. 14 No. 1, pp. 14-22.
Bessant, J. and Tidd, J. (2011), Innovation and Entrepreneurship, Wiley, London.
Bhaskaran, S. (2006), “Incremental innovation and business performance: small and medium-size
food enterprises in a concentrated industry environment”, Journal of Small Business
Management, Vol. 44 No. 1, pp. 64-80.
Bierly, E. and Daly, P. (2007), “Alternative knowledge strategies, competitive environment and
organisational performance in small manufacturing firms”, Entrepreneurship Theory and
Practice, Vol. 31 No. 4, pp. 493-516.
Bollen, K.A. (1989), Structural Equations with Latent Variables, JohnWiley & Sons, New York, NY.
Burgess, T., Shaw, N. and Mattos, C. (2005), “Organisational self-assessment and the adoption of
managerial innovations”, International Journal of Productivity and Performance
Measurement, Vol. 54 No. 1, pp. 98-112.
Callois, J. and Aubert, F. (2007), “Towards indicators of social capital for regional development
issues: the case of French rural areas”, Regional Studies, Vol. 41 No. 6, pp. 809-821.
CENTRIM (2010), CENTRIM Innovation Audit, Centre for Innovation Management Research,
University of Brighton, Brighton, January.
Churchill, N. and Lewis, V. (1983), “The five stages of small business growth”, Harvard Business
Review, pp. 30-50.
Clark, D. (2010), “Innovation management in SMEs: active innovators in New Zealand”, Journal
of Small Business and Entrepreneurship, Vol. 23 No. 4, pp. 601-619.
Cohen,W.M. and Levinthal, D.A. (1990), “Absorptive capacity: a new perspective on learning and
innovation”, Administrative Science Quarterly, Vol. 35 No. 1, pp. 128-152.
Cooke, P. (1996), “The new wave of regional innovation networks. Analysis, characteristics and
strategy”, Small Business Economics, Vol. 8 No. 2, pp. 159-172.
Cooke, P. and Schwartz, D. (2008), “Regional knowledge economies: an EU-UK and Israel
perspective”, Tijdschrift voor economische en sociale geografie, Vol. 99 No. 2, pp. 178-192.
Cooke, P., Uranga, M.G. and Etxebarria, G. (1997), “Regional innovative systems: institutional
and organisational dimensions”, Research Policy, Vol. 26 No. 4, pp. 475-491.
Craig, J. and Dibrell, C. (2006), “The natural environment, innovation, and firm performance:
a comparative study”, Family Business Review, Vol. 19 No. 4, pp. 275-275.
Creswell, J.W. (2003), Research Design: Qualitative, Quantitative, and Mixed Methods Approaches,
Sage, New York, NY.
DETI (2012), Regional Innovation Plan, Department of Enterprise Trade and Investment, Belfast,
available at:
SME and inter
SME levels
Dougherty, D. and Hardy, C. (1996), “Sustained product innovation in large, mature organizations:
overcoming innovation-to-organization problems”, Academy of Management Journal,
Vol. 39 No. 5, pp. 1120-1153.
du Plessis, M. (2008), “The strategic drivers and objectives of communities of practice as vehicles
for knowledge management in small and medium enterprises”, International Journal of
Information Management, Vol. 28 No. 1, pp. 61-67.
EFQM (2011), The Business Excellence Model, European Foundation for Quality Management,
Eisenhardt, K. (1989), “Building theories from case study research”, Academy of Management
Review, Vol. 14 No. 4, pp. 532-550.
EU RDF Guidelines (2010), European Regional Fund Guidelines Regional, available at:
Galende, J. (2006), “Analysis of technological innovation from business economics and
management”, Technovation, Vol. 26 No. 3, pp. 300-311.
Gatrell, J.D. (2001), “Integrated dependence: knowledge-based industries in peripheral regions”,
Economic Development Review, Vol. 17 No. 3, pp. 63-69.
Goktan, A.B. and Miles, G. (2011), “Innovation speed and radicalness: are they inversely
related?”, Management Decision, Vol. 49 No. 4, pp. 533-547.
Hair, J.F., Black, W.C., Babin, B.J. and Anderson, R.E. (2010), Multivariate Data Analysis, Prentice
Hall, Upper Saddle River, NJ.
Harris, R.I.D. and Robinson, C. (2002), “Research project on DTI industrial support policies”,
DTI Final Report Ref, SEC Research 01ITT No. SEC01, London.
Heirman, A. and Clarysse, B. (2007), “Which tangible and intangible assets matter for innovation
speed in start-ups?”, The Journal of Product Innovation Management, Vol. 24 No. 4,
pp. 303-315.
Helfat, C., Finkelstein, W., Mitchell, M., Peteraf, H., Singh, D., Teece, D. and Winter, S. (2007),
Dynamic Capabilities: Understanding Strategic Change in Organizations, Blackwell, London.
Hoang, D., Igel, B. and Laosirihongthong, T. (2010), “Total quality management (TQM), strategy
and organisational characteristics: evidence from a recent WTO member”, Total Quality
Management, Vol. 21 No. 9, pp. 931-951.
Hoyle, R.H. and Panter, A.T. (1995), “Writing about structural equation models”, in Hoyle, R.H.
(Ed.), Structural Equation Modeling. Concepts, Issues and Applications, Sage, London,
pp. 158-198.
Hu, L. and Bentler, P.M. (1998), “Fit indices in covariance structure modeling: sensitivity to under
parameterized model misspecification”, Psychological Methods, Vol. 4, pp. 424-453.
Hughes, T., O’Regan, N. and Sims, M. (2009), “The effectiveness of knowledge networks; an
investigation of manufacturing SMEs”, Education and Training, Vol. 51 No. 8, pp. 665-681.
Ibrahim, N., Angelidis, J. and Parsa, F. (2008), “Strategic management of family businesses:
current findings and directions for future research”, International Journal of Management,
Vol. 25 No. 1, pp. 95-110.
Izquierdo, C. and Cill�an, J. (2005), “The impact of customer relationship marketing on the firm
performance: a Spanish case”, The Journal of Services Marketing, Vol. 19 No. 4, pp. 234-244.
Janz, N., Loof, H., and Peters, B. (2003), “Firm level innovation and productivity – is there
a common story across countries?”, Proceedings of the Comparative Analysis of Enterprise
(Micro) Data Conference (CAED), Cass Business School, London.
Jayawarna, D., Jones, O. and Macpherson, A. (2011), “New business creation and regional
development: enhancing resource acquisition in areas of social deprivation”,
Entrepreneurship and Regional Development, Vol. 23 No. 9, pp. 735-761.
Jo¨reskog, K. and So¨rbom, D. (1981), LISRELV: Analysis of Linear Structural Relationships by the
Method of Maximum Likelihood, National Educational Resources, Chicago, IL.
Jo¨reskog, K.G. and So¨rbom, D. (1993), Structural Equation Modeling with the SIMPLIS Command
Language, Scientific Software Inc, Chicago, IL.
Klein, K. and Sorra, J. (1996), “The challenge of innovation implementation”, Academy of
Management Review, Vol. 21 No. 4, pp. 1055-1080.
Kotler, P. (2002), Marketing Management, Prentice Hall, New York, NY.
Laforet, S. and Tann, J. (2006), “Innovative characteristics of small manufacturing firms”, Journal
of Small Business and Enterprise Development, Vol. 13 No. 3, pp. 363-380.
Lam, A. (2004), “Organisational innovation”, BRESEWorking Paper No 1, pp. 1-44, University of
London, London.
Lane, P.J., Koka, B.R. and Pathak, S. (2006), “The reification of absorptive capacity: a critical
review and rejuvenation of the construct”, The Academy of Management Review, Vol. 31
No. 4, pp. 833-863.
Malecki, E.J. (2002), “Hard and soft networks for urban competitiveness”, Urban Studies, Vol. 39
No. 5, pp. 929-945.
Miles, M. and Huberman, A. (1994), Qualitative Data Analysis, Beverly Hills, CA.
Nash, R. and Martin, A. (2003), “Tourism in peripheral areas – the challenges for Northeast
Scotland”, International Journal of Tourism Research, Vol. 5 No. 1, pp. 161-181.
Oke, A., Idiagbon-Oke, M. and Walumbwa, F. (2007), “The relationship between broker’s
influence, strength of ties and NPD project outcomes in innovation-driven horizontal
networks”, Journal of Operations Management, Vol. 26 No. 4, pp. 571-599.
Otero-Neira, C. and Lindman, M.T. (2009), “Innovation and performance in SME furniture
industries”, Marketing Intelligence & Planning, Vol. 27 No. 2, pp. 216-232.
Parast, M., Adams, S. and Jones, E. (2011), “Improving operational and business performance in
the petroleum industry through quality management”, International Journal of Quality
and Reliability Management, Vol. 28 No. 4, pp. 426-450.
Perren, L. and Ram, M. (2004), “Case-study method in small business and entrepreneurial
research: mapping boundaries and perspectives”, International Small Business Journal,
Vol. 22 No. 1, pp. 83-100.
Perunovic, Z. and Christiansen, T.B. (2005), “Exploring danish innovative manufacturing
performance”, Technovation, Vol. 25 No. 9, pp. 1051-1058.
Phelps, R., Adams, R. and Bessant, J. (2007), “Life cycles of growing organisations: a review with
implications for knowledge and learning”, International Journal of Management Reviews,
Vol. 9 No. 1, pp. 1-30.
Pinho, C. (2008), “TQM performance in small medium enterprises the mediating effect of
customer orientation and innovation”, International Journal of Quality and Reliability
Management, Vol. 25 No. 3, pp. 256-275.
Pullen, A., Weerd-Nederhof, P., Groen, A., Song, M. and Fisscher, O. (2009), “Successful
patterns of internal SME characteristics leading to high overall innovation performance”,
Creativity and Innovation, Vol. 18 No. 3, pp. 209-225.
Radnor, H. (2001), Researching Your Professional Practice: Doing Interpretive Research, OU Press,
Radnor, Z. and Boaden, R. (2004), “Developing an understanding of corporate anorexia”,
International Journal of Operations and Production Management, Vol. 24 No. 4,
pp. 424-440.
Rammer, C. and Schmiele, A. (2009), “Drivers and effects of internationalizing innovation by
SMEs”, IUP Journal of Knowledge Management, Vol. 7 No. 2, pp. 18-61.
SME and inter
SME levels
Ramos-Rodrı´guez, A., Medina-Garrido, J., Lorenzo-G�omez, J. and Ruiz-Navarro, J. (2010),
“What you know or who you know? The role of intellectual and social capital in
opportunity recognition”, International Small Business Journal, Vol. 28 No. 6,
pp. 566-582.
Remenyi, D., Williams, B., Money, A. and Swartz, E. (1999), Research in Business and
Management, Sage, London.
Rese, A. and Baier, D. (2011), “Success factors for innovation management in networks of small
and medium enterprises”, R&D Management, Vol. 4 No. 2, pp. 138-151.
Robson, C. (2002), Real World Research, Sage, London.
Schafer, J.L. and Graham, J.W. (2002), “Missing data: our view of the state of the art”,
Psychological Methods, Vol. 7 No. 2, pp. 147-177.
Skuras, D., Tsegenidi, K. and Tsekouras, K. (2008), “Product innovation and the decision to invest
in fixed capital assets: evidence from an SME survey in six European member states”,
Research Policy, Vol. 37 No. 10, pp. 1778-1789.
Steiger, J.H. (1990), “Structural model evaluation and modification: an interval estimation
approach”, Multivariate Behavioural Research, Vol. 25 No. 2, pp. 173-180.
Tanaka, Y. (1987), “A proposal for a product innovation method through fusion strategy
in the intelligent computer aided management age”, Technovation, Vol. 6 No. 1,
pp. 3-19.
Teece, D., Pisano, G. and Shuen, A. (1997), “Dynamic capabilities and strategic management”,
Strategic Management Journal, Vol. 18, pp. 509-533.
Tucker, L. and Lewis, C. (1973), “A reliability coefficient for maximum likelihood factor analysis”,
Psychometrika, Vol. 38 No. 1, pp. 1-10.
Tura, T. and Harmaakorpi, V. (2005), “Social capital in building regional innovative capability”,
Regional Studies, Vol. 39 No. 8, pp. 1111-1125.
Verbees, J. and Meulenberg, M. (2004), “Market orientation, innovativeness, product innovation,
and performance in small firms”, Journal of Small Business Management, Vol. 42 No. 2,
pp. 134-154.
Vester, E. and Boshoff, C. (2006), “Influence of owner-manager-related factors on the succession
process in small and medium-sized family businesses”, International Journal of
Entrepreneurship and Innovation, Vol. 7 No. 1, pp. 33-48.
Welter, F., Kautonen, T., Chepurenko, A., Malieva, E. and Venesaar, U. (2004), “Trust environments
and enterpreneurial behavior – exploratory evidence from Estonia, Germany and Russia”,
Journal of Enterprising Culture, Vol. 12 No. 4, pp. 327-349.
Westlund, H. and Bolton, R. (2003), “Local social capital and entrepreneurship”, Small Business
Economics, Vol. 21 No. 2, pp. 77-113.
Yin, R. (2009), Case Study Research, Sage, London.
Yuan, K.H. and Bentler, P.M. (1998), “Robust mean and covariance structure analysis”, British
Journal of Mathematical and Statistical Psychology, Vol. 51, pp. 63-88.
Zahra, S.A. and George, G. (2002), “Absorptive capacity: a review, reconceptualization, and
extension”, The Academy of Management Review, Vol. 27 No. 2, pp. 185-203.
Zahra, S.A., Sapienza, H.J. and Davidson, P. (2006), “Entrepreneurship and dynamic capabilties:
a review, model and research agenda”, The Journal of Management Studies, Vol. 43 No. 4,
pp. 917-955.
Zhang, M., Macpherson, A. and Jones, O. (2006), “Conceptualising the learning process in SMEs:
improving innovation through external orientation”, International Small Business Journal,
Vol. 24 No. 3, pp. 299-323.
Further reading
Argyris, C. (1977), “Double loop learning in organisations”, Harvard Business Review, September-
October, pp. 115-125.
Canner, N. and Mass, N. (2005), “Turn R&D upside down”, Research Technology Management,
Vol. 48 No. 2, pp. 17-22.
Dale, B. and Lascelles, D. (1997), “Total quality management adoption: revisiting the levels”,
The TQM Magazine, Vol. 9 No. 6, pp. 418-428.
Davenport, S. and Bibby, D. (1999), “Rethinking a national innovation system. The small country
as SME”, Technology Analysis and Strategic Management, Vol. 11 No. 3, pp. 431-462.
Doloreux, D. (2003), “Regional innovation systems in the periphery: the case of the Beauce in
Quebec (Canada)”, International Journal of Innovation Management, Vol. 7 No. 1, pp. 67-94.
Fosfuri, A. and Tribo, J. (2008), “Exploring the antecedents of potential absorptive capacity and
its impact on innovation performance”, Omega, Vol. 36 No. 2, pp. 173-187.
Ghobadian, A. and Gallear, D. (1997), “TQM and organisation size”, International Journal of
Operations and Production Management, Vol. 17 No. 2, pp. 121-163.
Gibson, C. and Burkinshaw, J. (2004), “Contextual determinants of organisational ambidexterity”,
Academy of Management Journal, Vol. 47 No. 2, pp. 209-226.
Jones, J. (2005), “The determinants of training in Australian manufacturing SMEs”, Education &
Training, Vol. 47 No. 8, pp. 605-616.
Jones, O. (2006), “Developing absorptive capacity in mature organisations: the change agents
role”, Management Learning, Vol. 37 No. 3, pp. 1350-5076.
Kumar, K. (2010), “Similarities and differences in the strategic orientation, innovation patterns
and performance of SMEs and large companies”, The Business Review, Vol. 16 No. 2,
pp. 50-57.
Mosey, S., Clare, J. and Woodcock, D. (2002), “Innovation decision making in British
manufacturing SMEs”, Integrated Manufacturing Systems, Vol. 13 No. 3, pp. 176-183.
Moy, J. and Luk, V. (2003), “The lifecycle model as a framework for understanding barriers to
SME growth in Hong Kong”, Asia Pacific Business Review, Vol. 10 No. 2, pp. 199-210.
Naveh, E. and Erez, M. (2004), “Innovation and attention to detail in the quality improvement
paradigm”, Management Science, Vol. 50 No. 11, pp. 1576-1586.
Orlikowski, W. (2002), “Knowing in practice: enacting a collective capability in distributed
organizing”, Organizational Science, Vol. 13 No. 3, pp. 249-264.
Pearce, C. and Ensley, M. (2004), “A reciprocal and longitudinal investigation of the innovation
process: the central role of shaded vision in product and process innovation teams
(PPITs)”, Journal of Organisational Behaviour, Vol. 25, pp. 259-278.
Soderquist, K., Chanaron, J. and Motwani, J. (1997), “Managing innovation in French small and
medium-sized enterprises. An empirical study”, Benchmarking for Quality Management
and Technology, Vol. 4 No. 4, pp. 1-8.
van derWiele, T. and Brown, A. (2000), “Venturing down the TQM path for SME’s”, International
Small Business Journal, Vol. 16 No. 2, pp. 50-69.
Wan, D., Ong, C. and Lee, F. (2005), “Determinants of firm innovation in Singapore”,
Technovation, Vol. 25 No. 3, pp. 261-268.
Appendix –


Dive into the research topics of 'Determinants for innovation implementation at SME and inter SME levels within peripheral regions'. Together they form a unique fingerprint.

Cite this