Fabrication analysis of flat vacuum enclosures for solar collectors sealed with Cerasolzer 217

Farid Arya, Trevor Hyde, Paul Henshall, Philip Eames, Roger Moss, Stan Shire, James Uhomoibhi

Research output: Contribution to journalArticlepeer-review

1 Downloads (Pure)


Vacuum flat plate (VFP) solar thermal collectors exhibit excellent optical and thermal characteristics due to a combination of wide surface area and high vacuum thermal insulation offering a high performance and architecturally versatile collector with a variety of applications for industrial process heat and building integration. A vacuum flat plate solar collector consists of a solar absorber in a flat vacuum enclosure comprising glass or glass and metal covers sealed around the periphery with an array of support pillars to maintain the separation of the enclosure under atmospheric pressure. The edge seal must be both mechanically strong and hermetic to ensure the durability of the internal vacuum over collector lifetime. This presents several challenges for the fabrication of flat vacuum enclosures. In this study a novel sealing technique is presented using a tin-based alloy, Cerasolzer 217, to create the vacuum seal between two glass panes and an edge separating spacer. The sealing process is undertaken at temperatures ≤250 °C allowing the use of thermally tempered glass panes. The mechanical strength of the edge seal was investigated using a tensometer. It was demonstrated that the bond between glass and edge spacer was sufficiently strong to withstand induced stresses in the edge seal region. The edge seal was leak tested using a conventional Helium mass spectrometer leak detector and was shown to possess leak rates low enough to maintain an adequate vacuum pressure to supress conductive and convective heat transfer in the collector. A finite element method (FEM) is developed and validated against the experimental results and employed to predict the stresses in different regions of the enclosure. It was found that the mechanical strength limits of the seal and glass are higher than the stresses in the edge seal region and on the glass surface, respectively.
Original languageEnglish
Pages (from-to)635-649
Number of pages15
JournalSolar Energy
Early online date13 Apr 2021
Publication statusPublished - 1 May 2021


  • Vacuum enclosure
  • Solar absorber
  • Vacuum insulation
  • Solar Energy 220 (2021) 635–649Available online 13 April 20210038-092X/© 2021 The Authors. Published by Elsevier Ltd on behalf of International Solar Energy Society. This is an open access article under the CC BY-NC-NDlicense (http://creativecommons.org/licenses/by-nc-nd/4.0/).Fabrication analysis of flat vacuum enclosures for solar collectors sealed with Cerasolzer 217 Farid Aryaa,*, Trevor Hydeb, Paul Henshallc, Philip Eamesd, Roger Mosse, Stan Shiree, James Uhomoibhif aSchool of Engineering, Buckinghamshire New University, UK bCentre for Sustainable Technologies, Ulster University, UK cSchool of Architecture, Oxford Brookes University, UK dCentre for Renewable Energy Systems Technology, Loughborough University, UK eSchool of Engineering, University of Warwick, UK fSchool of Engineering, Ulster University, UK ARTICLE INFO Keywords: Vacuum enclosure Solar absorber Vacuum insulation Evacuated flat plate solar collector
  • Ultrasonic soldering


Dive into the research topics of 'Fabrication analysis of flat vacuum enclosures for solar collectors sealed with Cerasolzer 217'. Together they form a unique fingerprint.

Cite this