Performance of evacuated flat plate solar thermal collectors

Roger Moss, Stan Shire, Paul Henshall, Farid Arya, Philip C. Eames, Trevor Hyde

Research output: Contribution to journalArticlepeer-review

35 Citations (Scopus)
291 Downloads (Pure)

Abstract

Heat losses from a flat panel solar collector can be significantly reduced by lowering the internal pressure to<0.5 Pa. Compared with conventional collectors, the resulting increase in efficiency is predicted to give a significant gain in annual heat output in the context of a temperate climate with low median irradiance. Two experimental collectors were built and tested to investigate theoretical aspects of evacuated flat plates and develop appropriate technological solutions. One had a metal tray to the rear, the other used two sheets of glass. An array of pillars supports the glass against atmospheric pressure. The experimental procedure was designed to minimise measurement uncertainty. Testing under a solar simulator, with and without a vacuum, showed a sudden drop in heat loss as the pressure was reduced below 0.5 Pa. When evacuated the heat loss coefficient fell from 7.43 to 3.65 W/m2 K and the efficiency at a nominal test condition of ΔT=60 °C, G=1000 W/m2 increased from 36% to 56%. Heat losses from absorber to glass were within 9% of the predicted level. This demonstrates that the heat loss mechanism is well understood.
Original languageEnglish
Pages (from-to)296–306
Number of pages11
JournalThermal Science and Engineering Progress
Volume8
Early online date8 Sept 2018
DOIs
Publication statusPublished (in print/issue) - 1 Dec 2018

Keywords

  • Solar thermal
  • Flat plate
  • Vacuum
  • Evacuated
  • Uncertainty

Fingerprint

Dive into the research topics of 'Performance of evacuated flat plate solar thermal collectors'. Together they form a unique fingerprint.

Cite this